Table of Contents
Advertisement
Assembling the neat seam beginning (NSB)
Fig. 14: Assembling the NSB into the machine (2)
(2) - Throat plate
9. Assemble the throat plate (2).
Fig. 15: Assembling the NSB into the machine (3)
(3) - Pneumatic hose
(4) - Pneumatic hose
10. Assemble the suction container (6) under the tabletop.
11. Use the T-piece to connect the pneumatic hose (3) to the main air
12. Lay the pneumatic hose (4) under the machine along the valve block
Additional Instructions 911 - 00.0 - 05/2020
③
④
supply (5) of the compressed air maintenance unit.
that is assembled in the rear section of the machine.
②
(5) - Main air supply
(6) - Suction container
⑥
⑤
17
Advertisement
Table of Contents
