Table of Contents
Advertisement
Assembling the neat seam beginning (NSB)
4. Align the latching plate (3) and the locking mechanism (2) such that
Fig. 9: Locking mechanism (4)
(2) - Locking mechanism
(5) - Screws
5. Adjust the height of the screws (5).
When the machine head is folded down, the base plate rests on
6. Lock the locking mechanism (2) from the bottom using the screw (6).
Additional Instructions 911 - 00.0 - 05/2020
the cylinder head and the axle are seated flush inside the slot in the
latching plate (3).
⑤
the rubber heads.
The base plate lines up flush with the table.
(6) - Screw
②
⑥
13
Advertisement
Table of Contents
