Assembling the locking mechanism
Fig. 7: Locking mechanism (2)
①
(1) - Block
(2) - Locking mechanism
To assemble the locking mechanism:
1. Tighten the locking mechanism (2) to the stand.
2. Screw the proximity switch (4) onto the latching plate (3).
3. Screw the latching plate (3) with the block (1) in place under the base
Fig. 8: Locking mechanism (3)
(2) - Locking mechanism
12
plate.
Assembling the neat seam beginning (NSB)
(3) - Latching plate
(4) - Proximity switch
(3) - Latching plate
Additional Instructions 911 - 00.0 - 05/2020
④
③
②
③
②