Lower Anchor Installation - Britax MARATHON CLICKTIGHT User Manual

Britax Child Safety, Inc.

Lower Anchor Installation

IMPORTANT:
anchors for a child weighing more than 35 lbs (15.8 kg).
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar, if included (see page
27).
3. Recline the unoccupied
child seat and place
rear-facing on the vehicle
seat. Ensure that no more
than 3 in. (7.6 cm) of the
base hangs over the edge
of the vehicle seat (see
pages 25-26).
4. Remove the lower
connectors from the
storage compartment at
the rear of the seat and
pull the strap to full length
toward the child's left
side.
5. Slide the lower connector
strap into the rear-facing
belt slots and firmly press
the lower connectors
over their adjacent lower
anchors.
– Verify that the
connectors are secure
and the strap is not
twisted.
10
Do not install rear-facing with the lower
1a
3"
1b