The Clock - Rangemaster 90 Gas User Manual

The Clock

Setting the time of day
A - Timer knob, B - Adjusting knob
When the clock is first connected, the display flashes ( 0.00)

and ( ) alternately.
To set the time, turn and hold the Timer knob to the clock
symbol ( ) and at the same time turn the Adjusting knob left
A
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.
Minute Minder
Turn the Timer knob to the right to the (
setting – it should click into position:
Use the Adjusting knob to set the time you need as below:
You can either turn the knob back to the vertical manual
setting ( ) to keep an eye on the time of day, or leave it in the
B
( ) minute minder position as the time ticks down.
C
To stop the beeper when it sounds, turn the Adjusting knob
anticlockwise.
) minute minder
C
8
To stop the oven at a specific time of day
Turn the Timer knob to the (
Use the Adjusting knob to set the time at which the oven is to
stop.
You can set the oven to turn on at any time over the following
24-hour period. AUTO shows in the display:
Turn the Timer knob to the bottom 'Auto' setting. Once the set
time is reached, the beeper sounds. Turn the Timer knob to
the vertical ( ) to return to manual cooking.
B
To start and then stop the oven using the
Timer
Before you set the clock, decide on both the 'cook time' , which
is the period of time you want the oven to cook, and the 'stop
time' , which is the time of day at which you want the oven to
stop cooking.
You cannot set a start time directly – this is set
automatically by a combination of the 'cook time' and
'stop time' .
Turn the Timer knob to the (
Use the Adjusting knob to set the 'cooking time' you need:
) position.
E
) position:
D