Connection To The Mains Supply - Breville Antony Worrall Thompson VBM006 Manual

connection to the mains supply

This appliance must be earthed.
This appliance is fitted with either a moulded or rewirable BS16, 1 amp plug. The fuse should
be rated at 5 amps and be ASTA approved to BS16.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance
must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord and an
appropriate plug fitted as detailed below. If you remove the plug it must not be connected to a 1
amp socket and the plug must be disposed of immediately.
The wires of the mains lead are coloured in accordance with the following code:
GREEN/YELLOW = EARTH BLUE = NEUTRAL BROWN = LIVE
The wire which is coloured GREEN/YELLOW must be connected to the terminal in your plug
which is marked with an E or by the earth symbol ( ) or coloured GREEN or GREEN /YELLOW.
The wire which is coloured BLUE must be connected to the terminal in your plug which is marked
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in your plug which is
marked with the letter L or coloured RED.
If any other plug is used, a 5 amp fuse must be fitted either in the plug or adaptor or at the
distributor board.
Plug should be BS16 approved Fit a
5 Amp Fuse
GREEN/YELLOW
5 Amp Fuse
(Earth)
BLUE
BROWN
(Neutral)
(Live)
Ensure that the outer sheath of the cable is
firmly held by the clamp
0