Video Section Adjustment; Preparations Before Adjustments; Equipment To Required - Sony DCR-IP210 Adjustment

COVER
COVER

6-3. VIDEO SECTION ADJUSTMENT

NTSC model: DCR- IP210/IP220
PAL model: DCR- IP210E/IP220E
3-1.

PREPARATIONS BEFORE ADJUSTMENTS

Use the following measuring instruments for video section
adjustments.
3-1-1.

Equipment to Required

1) TV monitor
2) Oscilloscope (dual-phenomenon, band width above 30 MHz
with delay mode) (Unless specified otherwise, use a 10 : 1
probe.)
3) Frequency counter
4) Pattern generator with video output terminal
5) Digital voltmeter
6) Audio generator
7) Audio level meter
8) Audio distortion meter
9) Audio attenuator
10) Regulated power supply
11) Alignment tapes
• Tracking (XH8-1)
Parts code: 8-967-998-01
• SW V&A NTSC (XH8-2)
Parts code: 8-967-998-11
• SW V&A PAL (XH8-3)
Parts code: 8-967-998-21
12) Adjustment remote commander (J-6082-053-B)
DCR-IP210/IP210E/IP220/IP220E
6-49