Record Of Self-Diagnosis Check - Sony DCR-IP210 Adjustment

DCR-IP210/IP210E/IP220/IP220E

10. Record of Self-diagnosis check

Page 7
Note1: This data will be kept even if the lithium battery (BT4101 of PW-
2980 block) is removed.
Note2: The data of page: 0, address: 10 must be "00".
Address Self-diagnosis code
B0 "Repaired by" code (Occurred 1st time) *1
B1 "Block function" code (Occurred 1st time)
B2 "Detailed" code (Occurred 1st time)
B4 "Repaired by" code (Occurred 2nd time) *1
B5 "Block function" code (Occurred 2nd time)
B6 "Detailed" code (Occurred 2nd time)
B8 "Repaired by" code (Occurred 3rd time) *1
B9 "Block function" code (Occurred 3rd time)
BA "Detailed" code (Occurred 3rd time)
BC "Repaired by" code (Occurred 4th time) *1
BD "Block function" code (Occurred 4th time)
BE "Detailed" code (Occurred 4th time)
C0 "Repaired by" code (Occurred 5th time) *1
C1 "Block function" code (Occurred 5th time)
C2 "Detailed" code (Occurred 5th time)
C4 "Repaired by" code (Occurred the last time) *1
C5 "Block function" code (Occurred the last time)
C6 "Detailed" code (Occurred the last time)
*1: "01" t "C", "03" t "E"
Using method:
1) The past self-diagnosis codes are displayed at addresses: BC
to C6. Refer to "SELF-DIAGNOSIS FUNCTION" for detail
of the self-diagnosis code.
Note3: When the flash error code (E: 91: **) is displayed. After repair,
clear the error flag in the following method.
1) Select page: 7, address: 00, and set data: 80.
2) Select page: 7, address: 01, set data: 80 and press the PAUSE
button.
3) Check that the data of page: 7, address: 02 is "01".
Address B0 to C6
6-72
Ver 1.1 2003. 05