Remote Operator Panel; Notifications - Lexmark XC9225 User Manual

Understanding the printer menus
Menu item
Copy
Sides (1 sided to 1 sided*)
Pages per Side (Off*)
Darkness (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.

Remote Operator Panel

Menu item
External VNC Connection
Don't Allow*
Allow
Authentication Type
None*
Standard Authentication
VNC Password
Note: An asterisk (*) next to a value indicates the factory default setting.
Notifications
Menu item
ADF Loaded Beep
Off
On*
Alarm Control
Off
Single*
Continuous
Supplies
Show Supply Estimates
Show estimates*
Do not show estimates
Supplies
Cartridge Alarm (Single*)
Staple Alarm (Off*)
Hole Punch Alarm (Off*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the copy settings of the printer.
Description
Connect an external Virtual Network Computing (VNC) client
to the remote control panel.
Set the authentication type when accessing the VNC client
server.
Specify the password to connect to the VNC client server.
Note: This menu item appears only if Authentication Type is
set to Standard Authentication.
Description
Enable a sound when loading paper into the ADF.
Set the number of times that the alarm sounds when the printer
requires user intervention.
Show the estimated status of the supplies.
Set the number of times that the alarm sounds when the toner
cartridge is low, the staple cartridge is empty, or the hole punch
receptacle is full or missing respectively.
Note: The Staple Alarm and Hole Punch Alarm appear only
when output options are installed.
82