Fuel Pump - Honda Goldwing GL1200L 1985 Manual

CFI System
Fuel
P u m p l c o n t ' d l " - - - - - - - - - - - - - - - - - - - - -
Shut-Off Sensor Inspection
Disconnect the vacuum hoses from the PB sensors.
L""~VIlI\.l the detach the fuel pump
shut-off sensor and PB sensors as a unit.
Turn the ON and tilt the sensor to the left and
The main and fuel pump in the box
should as the sensor tilts 56·64 degrees
Remove the pump cover bolts and the cover.
a towel around the fuel line and fitting. loosen
the fuel hose nut Slowly, then disconnect the hose.
foo;tpeig bracket bolt, and the fuel
Removal/Installation
Disconnect the fuel pump white 2P f':nllnll~r
the rear fender.
Remove the
pump.
located on
Disconnect the fuel lines from the pump.
Remove the mounting bracket.
Install in the reverse order of removal.
COVER
Torque values:
Fuel hose banjo nut: 28 N.m (20 tt-lb)
Footpeg bracket bolt: 60 N.m (43 tt-lb)
SEALING
MOUNT WASHERS
BRACKETS
~
rl$)
r :
FUEL LINE
BANJO NUT
and
washers on the fittings.
fuel lines away from sharp
leaks after installation.
NOTES:
II Use new
II the
corners.
II
10·32