Oil Pressure Sensor; Tall Light Relay - Honda Goldwing GL1200L 1985 Manual

Remove the air cleaner cover.
Disconnect the 3P sensor
I.iU1UfJIII::l
under the right
side of the shelter.
NOTE: Be careful not to twist the sensor wire
removal and installation,
then the oil pressure sensor,
Remove the air vent
Release the wire from its two and the .... v,"''''.''''.
,null wIn
the gap between the frame and radiator neck.
Oil Pressure Sensor - - - - - - - - - - - - - - - - - - - - - - -
Removal
Installation
sealant to the switch threads, Install and
the switch.
12 N.m
Connect the sensor
COIJpIE~r
and air vent tube. Install the
air cleaner cover.
The is to the left of the radiator cap, Remove
the from the bracket and off the rubber cover.
screwdriver
nAI1rA~~~
the catch on the
cOIJPIE~r
with
a
the
out
Tail light Relay - - - - - - - - - - - - - - - - - - - -
Inspection
Remove the shelter.
Check for no cDrltin!uitv between terminals #1 and #2, If
there is install a new
h~t!tArv VOI!taCIEl across terminals #3 and #4 and
check the between #1 and #2, If there is no
install a new
8. . . 1 3