Oven Assembly; Oven Stand With Casters - Blodgett MT1828E Installation, Operation And Maintenance Manual

Installation

Oven Assembly

OVEN STAND WITH CASTERS

NOTE: Install the locking casters on the front of
the stand.
1. Attach each leg with casters to the stand
frame with a lock washer and nut. DO NOT
tighten completely.
2. Position the shelf between the legs with the
smooth surface facing the top of the stand.
Align the shelf with the holes in each leg. At-
tach the shelf to each leg with a nut and bolt.
Leg
Stand
Frame
Top of
Stand
Shelf
Figure 3
3. Tighten the bolts installed in step 1.
4. Rest the oven on its back. Install the oven
alignment pins (4) into the four holes provided
on the bottom of the oven.
5. Place the oven onto the stand. Locate align-
ment pins with holes in frame of oven stand.
Alignment
Pin
6