Blodgett MT1828E Installation, Operation And Maintenance Manual page 13

3. Unless specified otherwise, conveyor travel is
factory set for left to right operation when fac-
ing the front of the oven. If a direction change
is required, the polarity of the drive motor must
be reversed. Turn the oven OFF and inter-
S3
CONTROL
Y OR BL
S2 L2 L1
S1
SPEED
A1 A2 A3
W
change the black and white motor leads at the
D.C. controller located in the control panel.
Refer to Figure 8. In addition, the conveyor
belt must be installed from the left side of the
oven vs. the right side.
W
AC
AC
V
GND
BK
DC MOTOR
Figure 8
9
Installation
Oven Assembly