Lorex LHB926 Series Instruction Manual page 92

Hide thumbs Also See for LHB926 Series:

Table of Contents

Hard Drive Installation

3.2.

Position the hard drive over the hard drive screw holes (×4) in the bottom panel of the

recorder.

3.3.

Holding the hard drive securely in place, turn the recorder over. Keep holding the hard

drive while inserting the hard drive screws (×4) on the bottom panel of the recorder.

3.4.

Turn the recorder back over.

4. Reattach the cover and replace the screws in the side and back panel of the recorder.

NOTE

recorder

You must format any newly-installed hard drive in order for it to function properly with the system. For

full instructions on formatting the hard drive, see , page .

#LX400109; r. 2.0/54857/55689; en-US

Table of Contents

Show Quick Links

Table of Contents