ZyXEL Communications P-334WT Support Notes page 273

¡@
Key settings:
Assigned By=, Choose 'IP address attached on LAN'.
IP Address=,
installation.
¡@
2. Your ISP checks the 'Host Name'
Some ISPs take advantage of the 'host name' message in a DHCP packet such as @home to do the
authentication. When first installing, the ISP's tech people configure the host name as the 'Computer
Name' of the PC in the 'Networking' settings. When the P-334WT is attached to the cable modem to
connect to the ISP, we should configure this host name in the P-334WT's system (menu 1).
¡@
Menu 1 - General Setup
System Name= zyxel
Key Setting:
System Name=, The system name must be the same as the PC's computer name.
Menu 2 - WAN Setup
Link Mode= Half Duplex
MAC Address:
Assigned By=
attached on LAN
IP Address=
Enter the IP address of the PC which is installed by the ISP at the first
IP address
192.168.1.33