ZyXEL Communications P-334WT Support Notes page 109

Saving to ROM.
Protocol and device rule cannot be active together
To separate the device and protocol filter categories; two new menus, Menu 11.5 and Menu 13.1, have been
added, as well as some changes made to the Menu 3.1, Menu 11.1, and Menu 13. The new fields are shown
below.
Menu 3.1:
Menu 11.1:
Menu 21.1.2 - TCP/IP Filter Rule
Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
Source: IP Addr= 0.0.0.0
TCP Estab= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Please wait...
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Log= None