Omron F300 Installation Manual page 7

General Safety Precautions
The user must operate the product according to the performance specifications described in this
manual and the operation manuals.
Make sure that the ratings and performance characteristics of the product are sufficient for the sys-
tems, machines, and equipment, and be sure to provide the systems, machines, and equipment with
double safety mechanisms.
Heed the following cautions and warnings to prevent against injury or damage to the product.
WARNING
! Terminal Block Cover of the Power Supply Unit
To prevent electric shock after completing the connection of the Power Supply Unit, be sure
to cover the terminal block with the terminal protection cover (the cover and screw are
provided with the Unit) and fasten it using the plastic screw and the screw hole of the NC
terminal.
WARNING
Earthing the Protective Conductor Terminal
!
To prevent electric shock, be sure to wire the protective conductor terminal to the protective
earth using a conductor at least 2-mm
WARNING
! Memory Card Batteries
Do not short-circuits plus and minus battery terminals, attempt to charge batteries, take them
apart, deform them, or dispose of them in a fire.
Batteries can explode, leak, or combust.
WARNING
! Video Monitor
Do not open the back cover of the Video Monitor.
High-voltage parts inside may cause electric shock hazard.
! CAUTION Hot Lights
Do not touch a fluorescent, halogen, or strobe light while the power is on or immediately after
power is turned off. These lights can become extremely hot. Install a shield or move the light
to a location where it can't be touched accidentally.
x
2
(AWG14).