Omron F300 Installation Manual page 6

About this Manual:
This manual describes the basic installation and specifications of Units used in F300 Visual Inspection
System and includes the sections described below.
Please read this manual completely and be sure you understand the information provided before attempt-
ing to install and operate an F300 Visual Inspection System.
Section 1 presents a brief introduction to the F300 Visual Inspection System, its required Units, and op-
tional Units. This section also includes examples of system configurations.
Section 2 describes the basic components and operational specifications of each Unit in the F300 Visual
Inspection System.
Section 3 describes operational, installation, and wiring requirements for the F300 Visual Inspection Sys-
tem.
Section 4 explains how to inspect and maintain the F300 Visual Inspection System and troubleshooting
procedures to follow should problems occur.
WARNING
! Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
ix