Omron F300 Installation Manual page 13

System Components
F300-A2jjj Camera I/F Units
Unit
Camera I/F Unit
Normal
Normal, simultaneously
Shutter
Shutter, simultaneously
Frame shutter
1-1-2 Optional Expansion Units
I/O Units
Unit
F300-D2 Inputs: 8
Terminal Block Unit Outputs: 8
F300-DC2 Inputs: 8
Parallel I/O Unit Outputs: 32
F300-E2 RS-232C interface: 2
RS-232C I/F Unit channels
4
A Camera I/F Unit inputs video signals from a camera to the F300. Five types of
Camera I/F Unit are available to suit different applications. Two cameras can be
connected to each Camera I/F Unit. Order the lens separately.
Input Model
F300-A20
F300-A22S
F300-A20R
F300-A22RS
F300-A23RS
Expansion Units are optional and are available to further extend the capabilities
of the F300 System.
I/O Units can be used to input measurement commands from external devices
and to output results. Select the Unit to suit the application from the Terminal
Block Unit, Parallel I/O Unit, or RS-232C I/F Unit.
F300-D2
Terminal
Block Unit
Note Both the Terminal Block Unit and Parallel I/O Unit are identified as I/O Unit
(F300-D2) and I/O Unit (F300-DC2) on the actual units.
No. of I/O
None
50P L connector (included
with Unit)
F309-VR (25-pin connector,
5 m). If the connector is
different. Refer to 2-2-5
F300-E2 RS-232C I/F Unit
for cable connections in
detail.
F309-VSR2
Camera Cable
(5 m)
Camera
F300-S Camera
F200-S Camera
F300-S Camera
F300-S2R Shutter Camera
F300-S3DR Shutter Camera F300 S3DR Sh C
F300-S4R Frame Shutter Camera
F300-DC2 F300-E2
Parallel I/O RS-232C
Unit I/F Unit
Cable
Connect to a programmable controller or
o e de ce o other device to input measurement
commands and output measurement
results.
Connect to a computer or other device
equipped with an RS-232C interface to
input measurement commands and output
measurement results.
Section
Camera
Camera Cable
F309-VSR2 (5 m)
F309-VR
RS-232C Cable
(25-pin connector, 5 m)
Application
pu easu e e
1-1