Omron F300 Installation Manual page 62

System Setup
Storing the Console
2. To connect a cable, hold the rubber-molded part of the connector, align the
notches, and push the connector straight in until it locks.
3. To disconnect the cable, lightly pull the lock ring to unlock the connector and
pull the connector straight out. Do not apply undue force to the rubber
molding or the cable.
Store the Console in the recess provided in the MMI Unit when not in use. The
magnet on the top of the Console holds it in place. Push the Console into the
recess until it is held by the magnet.
Section 3-5
55