Jacuzzi J.Touch Use & Maintenance page 32

varying the
hydromassage intensity
additional functions
the function
("one-touch" mode)
The function lasts approximately 20
minutes; the hydromassage will au-
tomatically stop once this time has
lapsed (it is however possible to turn
it on again by as described previously)
Cromodream®,
water temperature
maintenance system
(where present)
friendly mod.
It is possible to use just one or both pumps: keep the key of the pump you wish to ad-
just held down and repeatedly press the +" key to begin the adjustment: when satisfied,
press the "-" key to stop it (once adjustments have been made, the pump-key LED light will
light up and briefly flash).
In the instance where just one pump is active, adjustment may be completed without
pressing the relative key beforehand.
selecting
It is possible to activate another function by holding down the relative key (the availa-
ble functions are those where the keys are lit up).
stopping
To switch off the hydromassage
remains on but it is not very bright); in the instance where both pumps are active, switch
one off followed by the other.
"One-touch" Mode: hold down the "on/off" key to switch off all active functions at the
same time.
1
Once you have finished using it, before emptying the tub, ALWAYS switch off the hy-
dromassage; also switch off the main switch of the appliance's power supply.
To enrich your wellness-experience, it is possible to add the Cromodream® coloured
light or the water temperature maintenance system to the hydromassage.
Refer to the relative chapters for details on their use.
1 2
hold down the key of the pump in operation (the key
1 2
2
32
1 2
1
1 2
2