Access To Power And Motor Terminals - Siemens PM330 Hardware Installation Manual

Connecting up, switching on
4.2 Line, motor and DC link connection
4.2.5

Access to power and motor terminals

Access to line and motor terminals
The line and motor terminals are
accessible via the following
steps:
1. Release the 2 screws from
the cover of the line
connection terminals and
remove the cover towards the
front.
2. For frame size GX and HX,
release the screw from the
cover of the motor connection
terminals and remove the
cover towards the front.
For frame size JX, two
screws are located in the
cover.
36
Hardware Installation Manual, 12/2018, A5E32844552B AF
Power Module PM330