Siemens PM330 Hardware Installation Manual page 77

Removal steps
1. Withdraw the plug connections
2. Remove the 6 screws from the FPI module
3. Withdraw the FPI module.
Installation steps
To reinstall, perform the above steps in the reverse order.
Tightening torque for the FPI module fastening screws: 1.8 Nm
Note
Carefully insert the plug-in connections and ensure that they are secure.
Power Module PM330
Hardware Installation Manual, 12/2018, A5E32844552B AF
5.4 Replacing additional components
①
.
②
.
Service and maintenance
75