Access To Power And Motor Terminals - Siemens PM250 Hardware Installation Manual

Connecting

4.6 Access to power and motor terminals

4.6 Access to power and motor terminals
Access to power and motor terminals
The terminals for frame size C can be accessed directly, without removing any cover.
Figure 4-1
Frame size D, E and F terminals covers are accessed by releasing the latch on the side of
the terminal covers with a suitable flat-bladed screwdriver. The cover can then be pushed
upwards and locked into position, as shown in the figure below.
Figure 4-2
36
Access to power and motor terminals on FSC
Access to power and motor terminals on FSD, FSE and FSF
Hardware Installation Manual, 09/2012, A5E01003502B AD
PM250 Power Module