Cable Lugs - Siemens PM330 Hardware Installation Manual

Connecting up, switching on

4.1 Cable lugs

4.1 Cable lugs
Cable lugs
The cable connections on the devices are designed for cable lugs according to DIN 46234 or
DIN 46235.
For connection of alternative cable lugs, the maximum dimensions are listed in the table
below.
These cable lugs are not to exceed these dimensions, as mechanical fastening and
adherence to the voltage distances is not guaranteed otherwise.
Figure 4-1
Table 4- 1 Dimensions of the cable lugs
Screw / bolts Connection cross-section
M12
The cable lugs can be attached as shown in the following diagram if, at one connection per
phase, two cable lugs can be connected.
Figure 4-2
32
Dimensions of the cable lugs
d2
[mm²] [mm]
240 13
2 cable lugs per connection
b l
[mm] [mm]
42 92
Hardware Installation Manual, 12/2018, A5E32844552B AF
c1 c2
[mm] [mm]
24 13
Power Module PM330