Apn Setting - ZyXEL Communications WAH7601 User Manual

The following table describes the labels in this screen.
Table 9 Configuration > Network > Connection
LABEL
Connection Operation
Connection Control
Roaming Mode
Item
PDN Type
State
Cellular Profile

7.3 APN Setting

Use this screen to view or configure a connection profile. A connection profile defines the parameters
that you need to connect to a mobile network, such as the APN, user name and password. Click
Configuration > Network > APN Configuration. The screen appears as shown next.
Figure 21 Configuration > Network > APN Configuration
Chapter 7 Network
DESCRIPTION
This field displays the connected mode of the WAH7601. Select Auto Mode to
connect to the mobile network automatically if there is an available mobile
network. Otherwise, select Manual Mode. Click Change to apply your changes.
Select Enable data roaming on the WAH7601. Otherwise, select Disable. Click
Change to apply your changes.
4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your WAH7601 is kept connected to
the Internet when you are traveling outside the geographical coverage area of the
network to which you are registered.
This field always displays WAN Status.
This displays the type PDN (Packet Data Network) of the connection profile.
• This displays Connected when the connection profile has a connection with the
ISP.
• This displays Connecting when the connection profile is attempting a
connection with the ISP.
• This displays Disconnected when the connection profile is not connected to the
ISP.
• This displays Disconnecting when the connection profile is disconnecting from
the ISP.
Click Connect for the WAH7601 to attempt a connection with the ISP.
This is the profile ID automatically by the WAH7601 to the connection profile.
WAH7601 User's Guide
44