Data Usage/Statistics - ZyXEL Communications WAH7601 User Manual

Table 12 Configuration > Network > WiFi Client
LABEL
SSID
Signal Strength (dBm)
Channel
Encryption Type
Total Num
Scan

7.8 Data Usage/Statistics

This screen allows you to enable mobile data usage control and set a monthly data limit. Click
Configuration > Network > Data Usage > Data Usage/Statistics. The screen appears as shown next.
Figure 28 Configuration > Network > Data Usage > Data Usage/Statistics
The following table describes the labels in this screen.
Table 13 Configuration > Network > Data Usage > Data Usage/Statistics
LABEL
Enable Data Limit
Total Allowance
Notify me when data usage
reaches
Chapter 7 Network
DESCRIPTION
This shows the descriptive name of the wireless network detected by the WAH7601.
Tap on an SSID and a pop-up window appears. Enter the Pre-Shared Key or
password and click Connect so the WAH7601 connects to the wireless network.
Figure 27 Pre-shared Key
This shows the strength of the wireless network's radio signal measured in dBm.
This shows the channel the wireless network uses.
This shows the data encryption method the WAH7601 uses for the wireless
connection.
This shows the total number of wireless networks your WAH7601 detects.
Click Scan to refresh the list of available wireless networks.
DESCRIPTION
Select the check box to activate a limiting amount of mobile data.
Specify the amount of data that can be transmitted via the mobile connection (in
GB).
Specify the percentage of data usage the WAH7601 has to reach to send a
notification.
WAH7601 User's Guide
49