Power Saving - ZyXEL Communications WAH7601 User Manual

Table 36 System > Setting > Date and Time
LABEL
Start Date
End Date
Time Server Address
1~3
Apply

13.8 Power Saving

To access this screen, click System > Setting > Power Saving. Use this screen to enable and configure the
power saving settings in the WAH7601.
Select the number of minutes after which the WAH7601 activates power saving and enters sleep mode.
In System will enter into sleep the WAH7601 turns off its wireless connections to save battery power when
the USB port is not connected, and there are no wireless clients associating with the WAH7601.
Select the number of minutes after which the WAH7601 enters deep sleep mode. In System will enter
into deep sleep the WAH7601 turns off the mobile networks to save battery power when the USB port is
not connected, and there are no wireless clients associating with the WAH7601.
Click Apply to save your changes.
Chapter 13 System
DESCRIPTION
Configure the day and time when Daylight Saving Time starts if you enabled Daylight Saving.
You can select a specific date in a particular month or a specific day of a specific week in a
particular month. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local
time. So in the United States, set the day to Second, Sunday, the month to March and the
time to 2 in the hour field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time
zones in the European Union start using Daylight Saving Time at the same moment (1 A.M.
GMT or UTC). So in the European Union you would set the day to Last, Sunday and the month
to March. The time you select in the o'clock field depends on your time zone. In Germany for
instance, you would select 2 in the hour field because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you enabled Daylight Saving.
You can select a specific date in a particular month or a specific day of a specific week in a
particular month. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the
United States you would set the day to First, Sunday, the month to November and the time to
2 in the hour field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would set the day to Last, Sunday, and the
month to October. The time you select in the o'clock field depends on your time zone. In
Germany for instance, you would select 2 in the hour field because Germany's time zone is
one hour ahead of GMT or UTC (GMT+1).
Enter the IP address or URL of your time server. Check with your ISP/network administrator if
you are unsure of this information.
Click Apply to save your changes back to the WAH7601.
WAH7601 User's Guide
96