Symbols; Terms Used; Abbreviations - Bosch Rexroth VT-VPCD Series Operating Instructions Manual

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk

1.3.2 Symbols

The following symbols refer to notes, which are not relevant to safety, but increase
the legibility of the documentation.
Table 3: Meaning of symbols
Symbol Meaning
If this information is disregarded, the product cannot be used or operated
in an optimum manner.
▶ Individual, independent step of action
1. Numbered instructions for action:
The numbers indicate that the activities are to be carried out consecutively.
2.
3.

1.3.3 Terms used

The following terms are used in this documentation:
Table 4: Terms
Term Meaning
LVDT Linear Variable Differential Transformer (position transducer)
U Operating voltage
B
BODAC Bosch Rexroth Operator Interface for Digital Axis Controllers

1.3.4 Abbreviations

The following abbreviations are used in this documentation:
Table 5: Abbreviations
Abbreviation Meaning
AI Analog Input
AO Analog Output
DI Digital Input
DO Digital Output
LSB Least Significant Bit
MSB Most Significant Bit
n.c. not connected
SWA Swivel Angle
www.hyquip.co.uk/web/index
About this documentation
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
7/60