Maintenance And Repair; Cleaning And Care; Maintenance; Repair - Bosch Rexroth VT-VPCD Series Operating Instructions Manual

Status screen
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
The "Status" window shows the status of the signals currently present. A subdivision
is made by "OK", WARNING" or "ERROR".
For further information on the Motion Data screen and the Status screen, please
refer to the online help.

10 Maintenance and repair

10.1 Cleaning and care

Ingress of dirt and humidity!
Malfunction, loss of function and short-circuit!
▶ Observe strictest cleanliness when carrying out any work on the control
electronics VT-VPCD.
▶ Use only dry and dust-free cloth for cleaning.

10.2 Maintenance

In the interest of a long service life and operational reliability include the following
activities for the control electronics in your maintenance schedule:
Inspect all terminal connections for correct connection and damage at least once a
year.
Inspect all cables for rupture or squashing.
Replace or have defective or damaged control electronics replaced immediately.

10.3 Repair

The control electronics VT-VPCD can only be replaced as a complete unit.
Unauthorized modifications of the VT-VPCD are not permitted for safety reasons.
Repair work may only be carried out by Bosch Rexroth AG. For repairs, return the
device to the service address given in Chapter 15.
www.hyquip.co.uk/web/index
Maintenance and repair
NOTICE
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
51/60