Bosch Rexroth VT-VPCD Series Operating Instructions Manual page 49

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
Level 1 Level 2
Analog I/O
Inputs
Fig. 29: Configuration example
The menu tree "Parameters" was selected in this example.
5. Press the control keys "ENT" and "ESC" simultaneously and hold them down
(for at least 2 seconds) until "Setup" is shown on the display of the control
electronics.
The control electronics is now in the configuration mode.
6. Use the control key "UP" or "DOWN" to navigate to menu item "Analog I/O".
7. Press the control key "ENT".
The control electronics is now at the second level of the configuration menu
"Analog I/O".
8. Use the control key "UP" or "DOWN" to navigate to the menu item "Inputs".
9. Press the control key "ENT".
10. Use the control key "UP" or "DOWN" to navigate to the menu item "Pressure
CMD".
11. Press the control key "ENT".
12. Use the control key "UP" or "DOWN" to navigate to the menu item "Max Unit".
13. Press the control key "ENT".
The value currently set is displayed.
14. Press control key "UP". This will create a positive sign. To create a negative sign,
press the "DOWN" key.
15. Press the "UP" control key repeatedly until "4" appears on the display.
16. Press the control key "ENT".
17. Press the "UP" control key repeatedly until "5" appears on the display.
18. Press the control key "ENT".
19. Press the "UP" control key repeatedly until "0" appears on the display.
20. Press the control key "ENT".
21. Press the "UP" control key repeatedly until "." appears on the display.
22. Press control key "ENT".
23. Press the "UP" control key repeatedly until "0" appears on the display.
24. Press the control key "ENT".
www.hyquip.co.uk/web/index
Level 3 Level 4
Pressure CMD
Max Unit
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
Operation 49/60
Level 5
[450] bar