Display And Operating Elements And Test Sockets - Bosch Rexroth VT-VPCD Series Operating Instructions Manual

LEDs
Keys
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk

5.2.3 Display and operating elements and test sockets

Status LEDs
Sign of value
Serial interface
Test sockets
Fig. 9: Front panel elements
The freely configurable test sockets X1/X2 provided on the front panel serve to
indicate process signals.
Their configuration is described in the online help.
The following states are signaled by LEDs:
LED " " (green): Enable active
LED "OK" (green): OK ready
LEDs "I1"..."I4" (yellow): Binary-coded command value call-ups
LED "I5" (yellow): Slave mode
LED "I6" (yellow): Command valid
LED "I7" (yellow): Not assigned
Using keys ENT, ESC, UP, DOWN you can navigate within the menu and access the
individual parameters and error messages. The keys are described in detail in
Chapter 9.2 "Operating the control electronics VT-VPCD" from page 24 onwards.
www.hyquip.co.uk/web/index
About this product
Keys
Display
Profibus
interface
(optional)
LED indicator
lamps for inputs (I)
and outputs (O)
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
23/60