Table of Contents
Advertisement
Uploading cartographic material
Uploading cartographic
material
The cartographic material of the country
in which you bought your Lucca will
have been pre-installed onto your Lucca.
This cartographic material will also be
provided on the supplied CD/DVD for later
re-installation. Depending on the version
you bought, the supplied CD/DVD might
also contain other cartographic material.
You now have the following options:
•
You can upload cartographic material
from the CD/DVD to the Lucca'smemory
•
You can use cartographic material stored
on the SD-/MMC card
You will also be able to buy SD-/MMC card
map updates.
Using the cartographic material
stored on a SD-/MMC card
➜
Turn on the Lucca using the On/Off
button.
The SD-/MMC card slot is located on the
Lucca right side.
➜
Push the SD-/MMC card into the slot as
indicated by the marking shown on the
slot until it engages.
You can now immediately use the new
data for navigation. Lucca always uses
the cartographic material stored on the
SD-/MMC card and that stored in its
memory to navigate.
Using cartographic material with
the Lucca
Downloading the cartographic material
contained on the supplied CD/DVD into the
Lucca's memory using a PC:
➜
Connect the Lucca to the PC through the
USB port.
➜
Turn on the Lucca using the On/Off
button.
You will now be shown a dialog box.
➜
Follow the onscreen instructions.
Download the cartographic material
into the memory. The old cartographic
material will not be overwritten.
Lucca software
Reinstalling the navigation
software
The Lucca's navigation software, including
instructions, is provided on the supplied
CD/DVD for reinstallation purposes.
Updating the navigation software
Blaupunkt
regularly
updates in order to make sure that your
Lucca is always up to date. These updates
can be downloaded from www.blaupunkt.
com.
Please
follow
the
instructions for downloading.
Lucca software
releases
software
Lucca's
onscreen
41
Advertisement
Table of Contents
