Track Logs; Recording Routes; Driving A Route (Simulation); Route Information - Blaupunkt TRAVELPILOT LUCCA 3.3 EE Operating And Installation Instructions

➜
Select the distance for which you want
to block the route (starting from your
current position).
The Lucca will now plan the route anew
and circumvent the blocked section of
the route.
NB:
If you want to remove the block placed
on a section of the route, you have to
end route guidance. To continue route
guidance, select the destination again
under Edit Way Points in the History
menu.

Track logs

You can use the Lucca to record the route
you are currently travelling. This route does
not have to go over roads and can include
footpaths or similar.
Recorded routes can be replicated at a later
time to get an overview of the route. Track
logs or recorded routes are not intended for
use in route guidance.
This feature can be used provided:
• You have GPS reception
➜
Press the Route button in the
Navigation menu.
The Route menu opens.
➜
Press the Track Logs button.
➜
The Track Logs menu opens.
The Track Logs menu shows all recorded
routes and their names as well as, on
the left, the colour in which the route
is shown on the map. If the route is not
shown on the map, the Lucca will display
a horizontal line to the left instead of a
colour.
Additional navigation functions

Recording routes

➜
Press the Record button in the Track
Logs menu.
The Lucca will now display the map and
record the route.
➜
Close the map and press the Stop
Recording button in the Track Logs
menu.
Recording is stopped.
always saved showing the date and
time. However, you can also give your
routes names. (Chap. "Selecting route
parameters", "Route information")

Driving a route (Simulation)

➜
Press the Replay button in the Track
Logs.
The Lucca will now display the map and
simulate driving along the route.

Route information

The Track Information menu can be used to
view additional information on a route and
to change the route settings. To do so:
➜
Press the Info button in the Track Logs
menu.
The Track Information menu opens.
You will now be shown the following
information on the recorded routes:
– Starting point
– Destination
– Distances
– Average speed
Routes are
31