Languages And Units; Advanced Settings; Display Options; Brightness - Blaupunkt TRAVELPILOT LUCCA 3.3 EE Operating And Installation Instructions

Languages and units

You can use the Language & Units menu
to select your preferred menu and voice
output language.
You can also use this menu to change the
time, date and distance displays.
NB:
When selecting the language for the
menus, the Navigation application will
close and restart to load the new language
settings. We therefore recommend that
you select your language last.
➜
Press the Navigation button.
The Navigation menu opens.
➜
Press the Settings button.
The Settings menu opens.
➜
Press the Language & Units
button.
The Language & Units menu
opens.
➜
Press on Units to change the units for
distances.
➜
Press on Set Date & Time Format to
select the date and time display format.
The Date & Time Format menu opens.
➜
Use the buttons shown below to select
from various Date & Time display
options:
– Date format
– Date delimiter
– Time format
➜
Press OK to accept the settings.
You will now be returned to the Language
& Units menu.
➜
Press the Voice Language button to
select your preferred language for the
navigation voice output:
The Guidance Language menu opens.
➜
Select your preferred language.
➜
Press OK to accept your selection.
You will now be returned to the Language
& Units menu.
➜
Press the Program Language button to
select your preferred language for the
menus.
The Program Language menu opens.
➜
Select your preferred language.
➜
Press OK to accept your selection.
You will now be shown a confi rmation
prompt.
➜
Press No if you do not want to load the
language.
- or -
➜
Press Yes to load the language.
The Navigation application will now
be closed and the selected language
settings loaded.
The Navigation menu will now be shown
in the selected language.

Advanced Settings

➜
Press the Settings button.
The Settings menu opens.
➜
Press the Advanced Settings
button.
The Advanced
opens.

Display options

You can use the Display Settings
menu to:
– Select 3D or 2D (3D deactivated) map
view
– Select the format used for the
coordinates on the destination input
screen
– Change route information
You can also use this menu to calibrate the
Lucca's screen.
Please read the chapter "Using map view
during route guidance", section "Activate
additional map information" for more
information.

Brightness

You can use the Brightness menu to adjust
the brightness of day / night mode.
➜
Press the Brightness button in
the Advanced Settings menu.
Basic settings
Settings menu
35