JVC NX-T5 Instructions Manual page 38

Table of Contents

Advertisement

Basic operations of HDMI CEC
Consumer Electronics Control (CEC) is the controlling signals optionally employed for the High-Definition Multimedia
Interface (HDMI) standard. When devices equipped with CEC are connected, each device can control the others.
The System is compatible with some basic functions of HDMI CEC.
TV compatible with
HDMI CEC
Following operations are available:
• When you select "DVD/CD" or "USB" as the source on the System, the TV automatically turns on and changes the input
to the one the System is connected.
• When you turn off the TV, the System automatically turns off. (This function works when "ON 1" is selected for "HDMI
CEC" setting. See page 34.)
• When you select the menu screen language of the TV, the same language is automatically selected on the System after the
System is turned off and turned on again. (The selectable languages are limited to those supported by the System.)
• As long as the connected TV is compatible, you can use the operations of the TV to start playback and operate other
functions on the System.
Note:
• This function is available only when the source is set to "DVD/CD" or "USB."
• This function is available when "ON 1" or "ON 2" is selected for the "HDMI CEC" setting (see page 34).
• For details about the CEC function, refer to the operation manuals of the connected CEC devices.
• Not all HDMI devices are compatible with CEC. If the System is connected to non-CEC compatible devices, these devices
cannot be controlled using the CEC function.
• The CEC function may not work with some CEC devices.
• The CEC function may not work depending on the settings or status of the System or the connected CEC devices.
• When connecting the System to a TV with an HDMI cable for the first time after purchase, confirm that "JVC" (the
initial screen) appears.
• When you disconnect the HDMI cable and connect it again, confirm that "JVC" appears.
• If the CEC function does not work properly, select "OFF" for the "HDMI CEC" setting, and then select "ON 1" or "ON 2"
again (see page 34).
35
HDMI cable
(not supplied)
HDMI cable
(not supplied)
HDMI device compatible
with HDMI CEC
The System (Main unit)

Advertisement

Table of Contents
loading

Table of Contents