Daily Operations-Playback - JVC NX-T5 Instructions Manual

Remote control
Number
buttons
Main unit
or
15
Daily Operations—
or
or
Playback
In this manual, operations using the remote control
are mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
1
Turn on the power.
The lamp on the main unit lights blue.
• The POWER ON/STANDBY lamp on the
subwoofer also lights blue.
• Instead of pressing
pressing one of the following buttons:
– DVD/CD, USB, FM, AUDIO IN, SOURCE, 3, 0
2
Select the source.
From the remote control
• For disc: Press DVD/CD. See page 17.
• For FM: Press FM. See page 16.
• For USB: Press USB. See page 17.
• For DIGITAL IN/AUDIO IN:
Press AUDIO IN repeatedly to select "DGTL IN" or
"AUDIO IN." See page 19.
On the main unit
Pressing SOURCE repeatedly changes the source as
follows:
• You can change the display information by pressing
DISPLAY. For details, see page 21.
3
Adjust the volume.
You can adjust the volume level from "VOL MIN"
(level 0) to "VOL MAX" (level 50).
To turn off (standby) the System
The lamp on the main unit lights red.
• The POWER ON/STANDBY lamp on
the subwoofer also lights red.
• A small amount of power is always
consumed even while on standby.
DO NOT turn off (standby) the System with
the volume set at an extremely high level;
otherwise, the sudden blast of sound may
damage your hearing and speakers when you
turn on the System or start playback.
, the System is turned on by