JVC NX-T5 Instructions Manual page 42

FM Radio Operations
Hard to hear broadcasts because of noise.
] Antenna connections are incorrect or loose.
] The FM antenna is not properly extended and
positioned.
Disc/USB Mass Storage Class Device Playback
Operations
The disc cannot be played back.
] You have inserted a disc whose Region Code is not
correct. ("WRONG REGION" appears on the TV.)
] The disc is placed upside down. Place the disc with the
label side facing front or facing up.
ID3 Tag on an MP3 file cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version
2. This System can only show ID3 Tag Version 1.
Groups and tracks are not played back as you expect.
] The playing order is determined when the groups
and tracks were recorded. It depends on the writing
application.
MP3, JPEG, MPEG-1, MPEG-2, or DivX files are not
played back.
] The disc or the USB mass storage class device may
contain different types of files (ex. MP3/JPEG). In this
case, you can only play back the files selected on the
control screen (see page 17).
] You have changed the file type setting after the System
read the disc or the USB mass storage class device. In
this case, reload the disc or disconnect the USB mass
storage class device and connect it again.
The disc sound is discontinuous.
] The disc is scratched or dirty.
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs are programmed to always use the original
language initially. If this happens, press AUDIO after
starting playback (see page 23).
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs are programmed not to display any subtitle
initially. If this happens, press SUBTITLE after starting
play back (see page 24).
The disc player panel does not open or close.
] The power cord is not plugged in.
] Child Lock is in use. "LOCKED" appears on the display
(see page 28).
39
HDMI Operations
No picture/sound is produced via the HDMI OUT
terminal.
] A disc/file recorded in a format incompatible with the
System/TV is played back. Confirm the playable disc/file
types (see page 3).
] The connected TV is not compatible with HDCP.
Connect a TV compatible with HDCP.
] The System fails to recognize the TV connected to the
HDMI OUT terminal. Disconnect the HDMI cable and
connect it again.
] An HDMI cable longer than 2 m is used. Use an HDMI
cable of 2 m or shorter to assure stable operation and
picture quality.
The HDMI CEC function does not work.
] The connected TV is not compatible with the HDMI
CEC function. Refer to the operation manual of the TV.
] "OFF" is selected for the "HDMI CEC" setting. Select
"ON 1" or "ON 2" for the "HDMI CEC" setting (see
page 34).
When you disconnect the HDMI cable and connect it
again, the HDMI CEC function does not work properly.
] The previous connection setting is stored on the System.
Select "OFF" for the "HDMI CEC" setting, and then
select "ON 1" or "ON 2" again (see page 34).