Advertisement
Quick Links
FAQ • VIMBLE 2A
TABLE OF CONTENTS
SET-UP & OPERATION
1) Is it recommended to manually rotate the tilt axis quickly?
2) How do I return to normal filming mode from selfie mode?
3) How do I control the camera using the gimbal's buttons?
4) How do I update the firmware for Vimble 2A?
5) How do I turn on the Wi-Fi of the GoPro?
6) How do I establish a Wi-Fi connection between the camera and the gimbal?
7) Do I have to manually connect the gimbal to the camera every time I use it?
8) How do I reset the Wi-Fi settings on the gimbal?
9) How to set up the connection between Vimble 2A and Ricca camera?
10) How do I make motion time-lapse with the gimbal?
11) How do I shoot motion time-lapse with Ricca on the Vimble 2A?
Advertisement
Related Manuals for FEIYUTECH Vimble 2A
Summary of Contents for FEIYUTECH Vimble 2A
- Page 1 7) Do I have to manually connect the gimbal to the camera every time I use it? 8) How do I reset the Wi-Fi settings on the gimbal? 9) How to set up the connection between Vimble 2A and Ricca camera? 10) How do I make motion time-lapse with the gimbal?
- Page 2 FAQ • VIMBLE 2A TABLE OF CONTENTS TROUBLESHOOTING 1) The gimbal vibrates with buzz and does not work properly. How do I solve this problem? 2) My gimbal is not being horizontal or drifts slowly by itself, etc. 3) My gimbal keeps vibrating. How do I resolve this?
-
Page 3: Setup And Operation
4) How do I update the firmware for Vimble 2A? The Vimble 2A can be updated via the Feiyu ON App. Gimbal firmware, keypad board firmware and Bluetooth firmware can all be updated via the app. After successfully updating, you need to hold the power button for around 10 seconds to boot it up. - Page 4 FAQ • VIMBLE 2A 6) How do I establish a Wi-Fi connection between the camera and the gimbal? (Continued) 3 Connect the gimbal with the Feiyu ON app. Select the correct camera model. 4 Search the SSID and input the password of the camera Wi-Fi (hotspot) and click “OK”.
- Page 5 11) How do I shoot motion time-lapse with Ricca on the Vimble 2A? First disconnect the Vimble 2A and Ricca, and make sure the Ricca is turned off; Connect Feiyu ON with Vimble 2A, and set up the motion track;...
-
Page 6: Troubleshooting
FAQ • VIMBLE 2A TROUBLESHOOTING 1) The gimbal vibrates with buzz and does not work properly. How do I solve this problem? a) Make sure to unlock all axes and properly balance the gimbal before powering on. b) Adjust the motor strength with the Feiyu ON application. - Page 7 FAQ • VIMBLE 2A 8) The Wi-Fi signal shows up but I am not able to connect to it. What should I do? Temporarily turn off the Wi-Fi of the phone and make sure the camera is not connected to any other devices (remote control for example) ‘Kill’...