Renault Scenic Manual page 98

PARKING BRAKE
1
2
Automatic operation
The parking brake ensures that the
vehicle is
automatically when the engine is
stopped by pressing the engine
Start/Stop button.
Indicator light 1 on the dashboard
and indicator light 3 on the
instrument panel light
confirm that the parking brake is
applied. Indicator lights 1 and 3 go
out when the doors are locked.
Depending on the vehicle, the
"parking brake applied" message
may appear on the instrument
panel.
Note: when the driver's door is
opened, a beep sounds and the
"parking brake released" message
appears on the instrument panel if
the parking brake is not applied (e.g.
if the engine stalls).
In this case, it is essential to
immobilise the vehicle by pulling
handle 2 and then releasing it.
The
automatically as soon as the vehicle
3
starts and accelerates. The "parking
brake released" message confirms
this action.
For certain country-specific model
versions,
application
activated. Refer to the information
on manual operation.
immobilised
up to
Indicator
dashboard and indicator light 3
on the instrument panel light up
to show that the parking brake is
applied, but go out when the
doors are locked.
brake will be released
the automatic brake
function is
Before leaving the
vehicle, check that the
parking brake is fully
applied.
light 1 on the
1
4
Manual operation
not
To apply the parking brake
Pull out and release handle 2.
Indicator light 1 on the dashboard
and indicator light 3 on the
instrument panel light up.
To release the parking brake
With the engine running, pull
handle 2 while pressing release
button 4, and then release. Indicator
lights 1 and 3 go out.
The message
released" appears on the instrument
panel.
2
3
"parking brake
2.07