Parking Proximity Sensor - Renault Scenic Manual

PARKING PROXIMITY SENSOR

Operating principle
Proximity sensors located in the
rear bumper "measure" the distance
between the vehicle and an obstacle
when reversing.
This measurement is indicated by
beeps which become more frequent
the closer you are to the vehicle,
until they become one continuous
beep when the
approximately 25 centimetres from
the vehicle.
Note: make sure that the ultrasonic
sensors are not blocked (dirt, mud,
snow, etc.).
obstacle is
Operating faults
When the system detects a fault a
beep sounds for 5 seconds as a
warning when reverse gear is
selected. Contact your RENAULT
Dealer.
This function
additional aid
indicates the
between the vehicle and an
obstacle when reversing by means
of audible signals.
Under no circumstances should
it replace vigilance
responsibility on the part of the
driver when reversing.
The driver should always pay
attention to sudden events which
may occur when driving: always
ensure that there are no moving
obstacles, such as a child, animal,
pram or bicycle, etc., or small,
narrow objects such as stones or
bollards, in your path when
manoeuvring.
is an
which
distance
and
2.41