Renault Scenic Manual page 78

CLOCK AND EXTERIOR TEMPERATURE
1
When the ignition is switched on,
the clock and (depending on
vehicle) external temperature are
displayed.
Setting the time on the clock 1
Vehicle with button 2
- press and hold button 2 for
approximately three seconds,
- when the hour flashes, press
button 2 again to adjust it,
- wait approximately three seconds,
the minutes will flash, press
button 2 to adjust them,
- wait approximately three seconds,
the minutes stop flashing, the time
is set.
Vehicle without button 2 (vehicles
equipped with a navigation system,
audio equipment, etc.)
Refer to the equipment instructions
for the special features of these
vehicles.
2
If the electrical supply is cut
(battery disconnected, feed wire
broken, etc.), the clock will not
display the correct time.
The clock must be reset.
We recommend that you do not
make these
driving.
Exterior temperature indicator
Special note:
When the external temperature is
between –3°C and +3°C, the °C
figures flash (indicates risk of ice
formation).
settings while
Exterior temperature
indicator
As black ice formation is
related to exposure,
humidity and temperature, the
exterior temperature alone is not
sufficient to detect black ice.
1.67