Display; Video - Toshiba D-VR17KB Owner's Manual

E9GA0BD_EN.book Page 69 Monday, March 26, 2007 10:14 AM

Display

1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER].
2
Select "Display" using [U / D], then
press [ENTER].
General Setting
Playback
Display

Video

Recording
Clock
Channel
DivX
Reset All
3
Select the desired item using
[U / D], then press [ENTER].
1
Screen Saver
2
FL Dimmer
4
Refer to 1. and 2. on this page and
set the selected item.
5
When you finish with the setting,
press [SETUP] to exit.
1. Screen Saver (Default: 10 minutes)
Set the screen saver time delay.
Select a setting using [U / D], then
press [ENTER].
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Your setting is activated.
2. FL Dimmer (Default: Bright)
Set the front panel display brightness.
Select a setting using [U / D], then
press [ENTER].
FL Dimmer
Auto
Bright
Dark
You can choose one from "Auto", "Bright" or
"Dark".
If "Auto" is selected, the display gets dark when
the power is off.
Video
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER].
2
Select "Video" using [U / D], then
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
Reset All
3
Select the desired item using
[U / D], then press [ENTER].
1
TV Aspect
2
Select Video
3
Video Out
4
Refer to 1. and 3. on this page and
set the selected item.
For 2., refer to page 38.
5
When you finish with the setting,
press [SETUP] to exit.
1. TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the
formats of what you are playing back with the unit and
your TV screen (4:3 standard or 16:9 widescreen TV).
Select the desired setting using
[U / D], then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on
the top and bottom of the TV screen when playing
back a wide-screen picture. Select "4:3 Pan & Scan"
for a full height picture with both sides trimmed when
playing back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
3. Video Out (Default: SCART(RGB))
This unit is compatible with the Progressive Scan
System. The feature provides you with the higher
definition images than the traditional output system
does. To utilise this feature, you must set Video
Output mode in the Setup menu by following the steps
on the right. "SCART (RGB)" is selected as the
default.
69
EN