Basic setup
Starting setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
Starting setup
1
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or
to select your desired language,
then press ENTER.
POWER
ENTER
2
Press
or
to select "TV" or "CABLE", then
press ENTER.
ENTER
Press
or
to select "START", then press
3
ENTER.
If you select "CANCEL" and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
ENTER
18
5L00201C [E]p18-21
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
CHANNEL PLAN
TV
CABLE
AUTO SETUP
START
CANCEL
18
4
Now the "AUTO CH MEMORY" and "AUTO
CLOCK"starts.
After the starting setup is completed, the TV
channel appears on the screen.
Notes:
• The starting setup function will work only when you press the
POWER button for the first time.
• In "AUTO CLOCK" setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only "Time
of day" or "Local time zone".
20/4/04, 16:05
POWER
/
ENTER
AUTO CH MEMORY
STOP : CANCEL