Toshiba MW20FP1 Owner's Manual page 20

Basic setup
Clock setting (continued)
To set standard time
In the rare event that you live within broadcast range of two
stations in two different time zones, the unit may recognize
the wrong station for the auto clock set.
To correct the situation:
Press MENU, then press
1
option.
MENU
ENTER
SETUP
2
Press or to select "STANDARD TIME", then
press .
ENTER
Press / / /
3
press ENTER.
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN : GMT–7hours
PACIFIC
ALASKA
ENTER
HAWAII
AUTO
(GMT: Greenwich Mean Time)
4
Press MENU repeatedly until the menu
screen is cleared.
MENU
SETUP
Note:
To be able to select the standard time, the clock must first be
set by "AUTO CLOCK" once.
20
5L00201C [E]p18-21
or to select
to select your time zone, then
: GMT–4hours
: GMT–5hours
: GMT–6hours
: GMT–8hours
: GMT–9hours
: GMT–10hours
: AUTO SET
20
To set daylight saving time
You can set the Daylight saving time automatically or
manually.
1
Press MENU, then press
option.
MENU
ENTER
SETUP
2
Press or to select "DAYLIGHT SAVING
TIME", then press .
ENTER
3 Press or to select one of the options, then
press ENTER.
ENTER
for manual setting (forward one hour)
ON:
for manual setting (back one hour)
OFF:
for automatic setting (read EDS in the signal)
AUTO:
When you want to set the Daylight Saving Time manually,
on the first Sunday in April you set to "ON", and on the last
Sunday in October you set to "OFF".
4 Press MENU repeatedly until the menu screen
is cleared.
MENU
SETUP
Notes:
• When shipped from factory, the DAYLIGHT SAVING TIME is
set to "AUTO" position.
• When the clock is not set, Daylight Saving Time setting is not
available.
• When there is no Daylight Saving Time in your area, always
select "OFF" position in step 3.
20/4/04, 16:05
or to select