Advanced Playback (Dvd); Zooming; Locating Desired Scene - Toshiba MW20FP1 Owner's Manual

Advanced playback (DVD)

Zooming/Locating desired scene
DVD

Zooming

VCD
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
1 Press ZOOM during playback.
The centre part of the image will be
INPUT
zoomed in.
SELECT
Each press of ZOOM will change the
ZOOM
ZOOM
(x 2.0).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the disc to locate the desired point to play back.
To check the title, chapter and time, press DISPLAY.
1 Press JUMP during playback or stop mode.
CM SKIP/JUMP
2 Press or to select the "Time", "Title" or
"Chapter".
ENTER
Note:
In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page
5L00201C [E]p44-47
1 (x 1.3), 2 (x 1.5) and 3
1
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
47
/ / /
Press to view a different part of the
2
frame.
You may move the frame from the
center position to UP, DOWN, LEFT or
ENTER
RIGHT direction.
In the zoom mode press ZOOM repeatedly to
3
return to a 1:1 view (
INPUT
SELECT
ZOOM
3 Press Number buttons (0–9) to change the
number.
1 2 3
Jump
4 5 6
7 8 9
0
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
ENTER
of the selected title.
• Some discs may not work in the
above operation.
20/4/04, 16:08
0–9
DISPLAY
CANCEL
JUMP
ZOOM
ENTER
Off).
Time
Title
Chapter 12
/Enter/0 9/Cancel/Jump
#
.
47