Clock Setting - Toshiba MW20FP1 Owner's Manual

Clock setting

The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Auto clock setting
Preparation:
• Connect the antenna or cable system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
1
Make sure the unit is turned off.
• If you press POWER, the Auto Clock
set is not effective.
2
Wait at least three minutes and press POWER.
Then press TV/VCR to select TV/VCR mode.
The POWER indicator will light.
POWER
POWER
TV/VCR
3
Press DISPLAY to check the clock on the
screen.
4
If the clock is not set, check the antenna
condition. The Auto clock may not function
properly if the reception condition is not
good.
Auto clock adjustment
The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want Auto Clock adjust
ment to be performed, the cable box must be left on.
• The Auto Clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
5L00201C [E]p18-21 19
To set auto clock to OFF
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want auto clock set (Adjustment):
1
Press MENU, then press
option.
MENU
SETUP
ENTER
2
Press or to select "AUTO CLOCK".
ENTER
Press or to select "OFF".
3
ENTER
4 Press MENU repeatedly until the menu
screen is cleared.
• When the AUTO CLOCK is set to
"OFF", the Auto Clock adjustment
MENU
does not function.
SETUP • Set the clock manually
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu .
56
• If no buttons are pressed for more than 60 seconds, the TV/VCR
menu screen will return to normal TV operation automatically.
20/4/04, 16:05
TV/VCR
POWER
DISPLAY
MENU
/ / /
or to select
.
21
19