Attaching the hood
1
Hook the tab on the hood to the groove at the top. (Fig. 1, Fig. 2)
2
Fix with the two screws at the bottom of the hood. (Fig. 3)
r To remove
1
Loosen the two screws at the bottom of the hood.
2
After pulling the bottom of the hood slightly forward, pull out upward.
Tilting operation
1
Turn the tilt friction knob to adjust to appropriate torque.
The operation torque will become larger when turned toward <+> direction.
2
Adjust the tilting.
Tab
Groove
Fig. 1
Screws
Fig. 3
Tilt friction knob
Fig. 2
Preparation
23