Remote Control Batteries; Attaching The Usb Memory Cover - Panasonic TH-65SQ1W Operating Instructions Manual

Remote Control Batteries

AAA/R03/LR03 type
Note
●
Incorrect installation of the batteries can cause
battery leakage and corrosion that will damage the
remote control.
●
Disposal of batteries should be done in an
environment-friendly manner.
Take the following precautions.
1. Batteries shall always be replaced as a pair.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example; manganese
dioxide battery and alkaline battery etc.).
4. Do not attempt to charge, disassemble or burn used
batteries.
5. Do not burn or breakup batteries.
Moreover, batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
14
English
Open the battery cover.
Insert batteries and close
the battery cover.
(Insert starting from the
side.)

Attaching the USB Memory Cover

When using a USB memory device, the USB memory
cover can be attached to protect the device.
Attach the USB memory cover using
any of the following screw positions
corresponding to the type of model.
49-inch model
1
Insert the USB memory device to the
USB terminal on the bottom of the
display.
USB
memory
Note
●
Select the USB terminal to be used with [USB
select]. (see page 90)
●
Depending on the USB terminal, the amount of
electricity supplied to an external device differs.
("USB terminal connection", see page 30)
2
Attach the USB memory cover,
aligning the M4 screw with the screw
hole of the display unit.
USB memory cover
B:
98-inch model
86-inch model
65-inch model
55-inch model
USB terminal