Panasonic AK-HVF100G Operating Instructions Manual page 31

[FUNCTION]
Item
[EXIT]
[FUNCTION1]
[FUNCTION2]
[FUNCTION3]
Returns to the upper level.
Selects the function assigned to the <F1> button.
[SCAN]: Switches between the underscan and normal display.
[WFM]: Displays the waveform display screen.
[MARKER]: Displays the marker.
[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image
(disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the
power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the
operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).
[CROSS HATCH]: Switches the cross hatch display.
[MONO]: Switches between the color and monochrome display.
[UP TALLY]: Switches the on/off of the up tally lamp.
[FRONT TALLY]: Switches the brightness of the front tally lamp.
[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled
when the power is turned off).
[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.
[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.
[UNDEF]: Function is not assigned.
f Factory setting: [MONO]
[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera
(AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
Selects the function assigned to the <F2> button.
[SCAN]: Switches between the underscan and normal display.
[WFM]: Displays the waveform display screen.
[MARKER]: Displays the marker.
[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image
(disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the
power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the
operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).
[CROSS HATCH]: Switches the cross hatch display.
[MONO]: Switches between the color and monochrome display.
[UP TALLY]: Switches the on/off of the up tally lamp.
[FRONT TALLY]: Switches the brightness of the front tally lamp.
[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled
when the power is turned off).
[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.
[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.
[UNDEF]: Function is not assigned.
f Factory setting: [WFM]
[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera
(AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
Selects the function assigned to the <F3> button.
[SCAN]: Switches between the underscan and normal display.
[WFM]: Displays the waveform display screen.
[MARKER]: Displays the marker.
[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image
(disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the
power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the
operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).
[CROSS HATCH]: Switches the cross hatch display.
[MONO]: Switches between the color and monochrome display.
[UP TALLY]: Switches the on/off of the up tally lamp.
[FRONT TALLY]: Switches the brightness of the front tally lamp.
[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled
when the power is turned off).
[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.
[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.
[UNDEF]: Function is not assigned.
f Factory setting: [FOCUS-IN-RED]
[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera
(AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
Setting content
Menu operations
31